UCI technology helps in hardness testing of surfaces of thin & small workpieces.
While portable hardness testing equipment is an immediate need for testing cumbersome parts of an immovable workpiece, the UCI or Ultrasonic Contact Impedance technology facilitates enables testing of surfaces of small & thin workpieces.
Thin workpieces could be difficult to deal with. This is the reason why UCI tester is preferred to test those special surfaces. These units, which coul portable Rockwell tester d be as thin as 2mm, are either hard or soft. Using UCI technology, professionals can determine the hardness value of both hard & soft workpieces. Both manual and motorized probe systems are employed for hardness testing. Surfaces of very thin coatings, platings, high polish finish, etc. are tested using motorized probe systems.
What is the UCI method?
The Ultrasonic Contact Impedance was invented by Claus Kleesattel, which helped in the testing of thin workpieces with great accuracy and reliability. This wouldn’t have been possible using standard hardness testing equipment.
As the hardness testing devices utilize different probes for testing hardness of materials, the measured values can be saved, assessed, and compared. Workpieces with cumbersome geometries and difficult-to-reach conditions can be tested using UCI testers.
Where to shop:
Several online suppliers offer this advanced testing equipment at highly competitive prices. You can check for calibrated laboratory test certificate, accuracy values, and other aspects for determining a hardness tester’s capability. Also, most of the websites furnish details about the use of motorized probe systems for accurate hardness measurement. Meanwhile, you can also look for portable Rockwell tester and similar equipment online.
|